UV-5003 Water-Based Polyurethane Acrylic Resin

UV-5003 is a UV/EB-curable water-based polyurethane acrylic resin. It can be blended with UV-5006 in any ratio to achieve products with excellent flexibility, high wear resistance, and chemical resistance. It can also be co-formulated with other water-based UV resins to increase the solid content or flexibility of coatings.

Note: When co-formulating, please ensure to adjust the pH value of the resin separately to 8-9.


Inquiry Now

Product Features

  • Low viscosity with high solid content.
  • Excellent flexibility.
  • Strong adhesion to various plastic substrates.

Application Areas

Recommended for water-based wood topcoats, plastic paint finishes, etc.

Typical Physical Data

Appearance
White emulsion
Solid Content
60±1 %
PH
3~6
GB6920-1986
Density (25℃)
1.10 g/cm3
Viscosity
<1000 CPS
GB/T2794-2013 (Brookfield LV, 62#30rpm, 25℃)
Functionality
3

Safety, Packaging, and Storage

1. This product is non-hazardous. Store indoors in the original, unopened, undamaged containers within a temperature range of 4-40°C, under dry conditions. Avoid direct sunlight and radiation sources. Maintain good ventilation and avoid contact with strong acids or alkaline substances.

2. Under the aforementioned storage conditions, the shelf life is 6 months from the date of production.

3. Packaging: 50KG/120KG non-recyclable plastic drums. Once used, tightly close the drum lid when not fully emptied.

Precautions

The toxicological properties of this product have not been fully determined. Avoid contact with eyes, skin, and clothing. This product may cause skin and eye irritation and may trigger allergic reactions. Thoroughly clean after use and maintain good ventilation and container closure.